Installation Manual

2
3
2
3
4
5
6
1
1R
2
3
4
5
6
2
3
4
5
6
1
1
2
3
Lay Back Holes: are needed for the manual opening and are used to place the end poles of the section
into when using the pool. See Fig. 9 & 10
Fig. 9
Fig. 10
Step 2: Understanding How to Drill
Angle & Level Holes: Before drilling you need to survey all the holes and mark the direction in which
the holes will be drilled, should it be a Light Lean Angle, Heavy Lean Angle or a Level Hole? Should the
pole lean toward the pool or away from the pool or be level? See diagram below. Mark an arrow on the
deck surface to avoid making a mistake. Angles are needed to ensure proper tension and aesthetics. Fig.
12 shows a Light Lean away from the pool. Fig. 13 shows a Heavy Lean toward the pool. Level holes are
dr
illed perpendicular to the deck surface or no lean at all. See Fig. 14
Fig. 12
Fig. 13
Fig. 14
L
Start
Point
Start
Point
1L
1R
1L
Lay Back Holes
Closed
Fence Line:
Open
* See next page for further explanation.
Heavy Lean
Light Lean