Service Manual

30
Locking Rack
Allen screw
Extrusion
Locking Mechanism
Seat
Assembly
Lifecycle 9500HR / 9100 Series Recumbent Exercise Bikes
How To... REPLACE THE LOCKING RACK
Tools Required: Allen wrench set, torque wrench
1. Disengage LOCKING MECHANISM and
slide SEAT ASSEMBLY to the rear of the
EXTRUSION.
2. Remove ALLEN SCREW from the front of the
LOCKING RACK.
3. Disengage LOCKING MECHANISM and
carefulley slide SEAT ASSEMBLY to the front
of the EXTRUSION.
4. Remove ALLEN SCREW from the rear of the
LOCKING RACK and remove LOCKING
RACK.
5. Replace LOCKING RACK in the reverse
order of the above steps. Torque Allen
screws to 50-55 IN. LBS.