Service Manual

25
Lifecycle 9500HR / 9100 Series Recumbent Exercise Bikes
How To... REPLACE THE PEDALS
Tools Required: 5/8 inch open end wrench
1. To remove the LEFT PEDAL, place a 5/8
inch open end wrench on the PEDAL BOLT
and turn the wrench clockwise.
2. To remove the RIGHT PEDAL, place a 5/8
inch open end wrench on the PEDAL BOLT
and turn the wrench counterclockwise.
3. Install the new PEDALS onto the CRANK
ARMS. To tighten the PEDALS, place a 5/8
inch open end wrench on the PEDAL BOLT.
Move the wrench counterclockwise for the
LEFT PEDAL and clockwise for the RIGHT
PEDAL.
Right Pedal
Counterclockwise to Remove
Clockwise to Install
Left Pedal
Clockwise to Remove
Counterclockwise to Install
Section III