Service Manual

Lifecycle 9500HR / 9100 Series Recumbent Exercise Bikes

How To... REPLACE THE FOOT STRAP

Tools Required: None

NOTE: THE STRAP HAS BEEN INITIALED “L” FOR LEFT AND “R” FOR RIGHT

TO SHOW PEDAL LOCATION.

1. Grasp the outside of the worn STRAP and pull AWAY and DOWN from the

knob on the PEDAL.

2. Grasp the inside of the worn STRAP and pull AWAY and DOWN from the knob

on the PEDAL.

3. Insert the outside of the new STRAP with the slit on the outside knob of the

PEDAL. Pull the STRAP UP until it locks in place.

4. Insert the inside of the new STRAP with the slit on the inside knob of the

PEDAL. Pull the STRAP UP until it locks in place.

Section III