Service Manual

16
Lifecycle 9500HR / 9100 Series Recumbent Exercise Bikes
How To... REPLACE THE BATTERY(LC9100)
Tools Required: Phillips screwdriver
1. Locate and remove the SCREW from the
BATTERY DOOR located on the rear of
the CONSOLE.
2. Disconnect the 9 VOLT ALKALINE
BATTERY from the WIRE HARNESS and
replace with a new 9 VOLT ALKALINE
BATTERY.
3. Carefully insert 9 VOLT ALKALINE
BATTERY and WIRE HARNESS into the
back of the display console.
4. Reinstall the BATTERY DOOR and
secure with SCREW.
9 Volt Alkaline Battery
Battery Door
Screw
Console
Wire Harness