Service Manual

11
Lifecycle 9500 / 9100 Series Recumbent Exercise Bikes
DIAGNOSTICS
CVA ENABLED
DIAGNOSTICS STATE 5 - CVA ENABLE/DISABLE (Integrated PCB Only)
Within this state, CVA support can be turned ON or OFF.
The "UP" and "DOWN" arrow keys toggle between CVA ENABLED and CVA DISABLED.
The ENTER key LED will indicated when the value is at the default setting of CVA DISABLED.
This value is stored in EEROM and is kept when the LifeCycle is not in use.
Press the ‘CLEAR/PAUSE’ key to return to DIAGNOSTICS STATE 4.
Press the ‘START/ENTER’ key to advance to DIAGNOSTICS STATE 6.
Section II