Instructions / Assembly

LIFAN Power USA
2205 Industrial Park Road
Van Buren, AR 72956
866-471-7464
www.lifanpowerusa.com
9
Controls and Features
Legend
1. Throttle Valve Lever – Controls Engine Speed
2. Choke Lever –
LF4WP Model: Before starting cold water pump, pull the choke pin outward
from water pump to activate the choke lever. After allowing water pump to
run for a few seconds, push pin inward toward water pump.
LF2WP & LF3WP Models: Before starting cold water pump, rotate the
choke lever to the left until resistance is felt. After starting the water pump,
rotate the choke lever to the right to disengage.
3. Fuel Cock – Turn to “OFF” position to terminate fuel delivery to engine.
4. Recoil Starting Handle – Pull Handle to rotate engine for starting.
5. Frame – 1inch round steel tubing for maximum protection.
6. Engine Switch – Rocker Style: Set to “ON” position to start engine & “OFF”
position to shut engine off.
7. Dipstick – Check/Fill Engine Oil.
8. Intake Pipe – Pump Suction intake.
9. Outlet Pump – Pump Discharge pipe.
10. Muffler – Allows quiet operation.
11. Spark Plug – Engine Spark Plug location; Check Maintenance Schedule for
Service Intervals; Disengage during transportation and storage; NEVER start
engine with Spark Plug disengaged.
12. Air Cleaner – Check Maintenance Schedule for Service Intervals.
13. Fuel Filler Cap – Vented Fuel Cap must be properly installed at all times
during operation.