Operating and installation instructions Upright refrigerator with BioFresh compartment 210514 7085340 - 01 SKBes4213 ...
Appliance at a glance Contents 1 1.1 1.2 1.3 1.4 1.5 1.6 Appliance at a glance............................................ Description of appliance and equipment.................. Range of appliance use............................................ Conformity................................................................ External dimensions of the appliance....................... Saving energy.......................................................... HomeDialog...............................................
Appliance at a glance Use the appliance solely in a domestic type of 1.4 External dimensions of the applienvironment. All other applications are inadmis- ance sible.
General safety information 1.6 HomeDialog Depending on model and options, the HomeDialog system can be used to network a number of Liebherr appliances (situated, for example, in the basement) with a main appliance (sited, for example, in the kitchen) and control them via the latter. You will find more information on the benefits, requirements and principle of operation on the internet at www. liebherr.com.
Controls and displays Note identifies useful information and tips. 3 Controls and displays 3.1 Operating and control elements WARNING Risk of fire due to short circuit! If the mains cable/connector of the appliance or of another appliance touch the rear of the appliance, the mains cable/ connector may be damaged by the appliance vibrations, leading to a short circuit. u Stand the appliance so that it is not touched by connectors or main cables.
Putting into operation u Remove all transit supports. u Dispose of packaging material (see 4.5) . u Align the appliance so that it stands firmly and on a level by applying the accompanying spanner to the adjustableheight feet (A) and using a spirit level. u Then support the door: Extend the adjustable foot at the turn hinge (B) until it rests on the floor and then make a further 90° turn.
Putting into operation 4.3.5 Fitting the door 4.3.3 Changing the bearing parts u Place the door from above onto the lower bearing pin Fig. 7 (22). u Close the door. u Insert the upper turn hinge Fig. 6 (12) in the door on the new hinge side. u Screw the upper turn hinge Fig. 6 (12) firmly into place (with 4 Nm)(2x Torx® 25) Fig. 6 (13). Possibly make preliminary holes with a bradawl or use a cordless screwdriver. u Snap the cover Fig. 6 (10) and cover Fig. 6 (11) into place at the opposite side. 4.3.
Control 4.5 Disposing of packaging WARNING Risk of injury due to the door dropping out! If the bearing parts are not screwed into place firmly enough, the door may drop out. This may lead to severe injuries. What is more, the door may not close and therefore the appliance may fail to cool properly. u Screw the turn hinges firmly into place with 4 Nm. u Check all of the screws and retighten if necessary. 4.
Control w The display indicates c. w The menu symbol Fig. 3 (4) shines. u Using the Up setting button Fig. 3 (2) and Down setting button Fig. 3 (3), select h. u To confirm: briefly press the SuperCool button Fig. 3 (7). u To set the display brighter: press the Up setting button Fig. 3 (2). u To set the display darker: press the Down setting button Fig. 3 (3). u To confirm: briefly press the SuperCool button Fig. 3 (7). w The brightness is adjusted to the new value.
Control 5.4.3 SuperCool 5.4.6 Using the sectioned shelf With SuperCool you switch to the highest cooling performance to reach lower cooling temperatures. Use SuperCool, to rapidly cool large amounts of food. The SuperCool function uses slightly more energy. Cooling with SuperCool u Briefly press SuperCool button Fig. 3 (7). w The SuperCool symbol Fig. 3 (12) lights up in the display. w The cooling temperature drops to the coldest value. SuperCool is activated.
Control Standard values for storage time at low humidity Game up to 7 days Note u Please note that protein-rich food deteriorates faster, i.e. shellfish and crustaceans deteriorate faster than fish, fish faster than meat. u The door racks can be dismantled for cleaning. 5.4.8 Removing the bottle holder Standard values for storage time at high humidity u Always take hold of the bottle holder on the plastic part.
Control Standard values for storage time at high humidity Grapes up to 29 days Additional standard values for storage time in the BioFreshPlus compartment Seafood Crab at -2 °C up to 4 days Mussels at -2 °C up to 6 days Sushi at -2 °C up to 4 days u To confirm: press SuperCool button Fig. 3 (7). w The temperature slowly adjusts to the new value. u To deactivate the setting mode: press the On/Off button Fig. 3 (6). -oru Wait for 5 minutes.
Maintenance 6 Maintenance 6.1 Cleaning the appliance After cleaning: u Wipe dry the appliance and items of equipment. u Connect the appliance and switch it on again. u Put the food back inside. 6.2 Customer service WARNING Risk of injury and damage as a result of hot steam! Hot steam can lead to burns and can damage the surfaces. u Do not use any steam cleaners! NOTICE Incorrect cleaning damages the appliance! u Do not use cleaning agents in concentrated form.
Decommissioning Excessive noise. → Due to the various speed steps, speed-regulated* compressors can generate different running noises. u The sound is normal. A bubbling and gurgling noise. → This noise comes from the refrigerant flowing in the refrigeration circuit. u The sound is normal. A quiet clicking noise. → The noise is produced whenever the refrigeration unit (motor) automatically switches on or off. u The sound is normal. A hum.
Disposing of the appliance * Depending on model and options 15
Liebherr Hausgeräte Ochsenhausen GmbH * Memminger Strasse 77-79 * 88416 Ochsenhausen * Deutschland * www.liebherr.
