Operating and installation instructions Upright refrigerator with BioFresh compartment 280514 7085616 - 01 SKBes/SKB/KB/KBes 31/36/42 ...
Appliance at a glance Contents 1 1.1 1.2 1.3 1.4 1.5 1.6 Appliance at a glance............................................ Description of appliance and equipment.................. Range of appliance use............................................ Conformity................................................................ External dimensions of the appliance....................... Saving energy.......................................................... HomeDialog...............................................
Appliance at a glance - Storage and cooling of medicines, blood 1.4 External dimensions of the appli- plasma, laboratory compounds or similar ance materials and products subject to the Medical Devices Directive 2007/47/EC - Use in potentially explosive areas Improper use of the appliance can lead to damage to or spoilage of the stored goods. Climate rating definitions The appliance is set to operate within specific ambient temperature limits according to its climate rating.
General safety information Accumulated dust increases the energy consumption: - Once a year, dust the refrigerating unit together with the metal grille of the heat exchanger at the back of the appliance. 1.6 HomeDialog Depending on model and options, the HomeDialog system can be used to network a number of Liebherr appliances (situated, for example, in the basement) with a main appliance (sited, for example, in the kitchen) and control them via the latter.
Controls and displays NOTICE identifies a dangerous situation which, if not obviated, may result in damage to property. Note identifies useful information and tips. 3 Controls and displays 3.1 Operating and control elements WARNING Risk of fire due to short circuit! If the mains cable/connector of the appliance or of another appliance touch the rear of the appliance, the mains cable/ connector may be damaged by the appliance vibrations, leading to a short circuit.
Putting into operation NOTICE* The stainless steel doors are provided with a high-quality surface coating and must not be treated using the accompanying care product. Otherwise the surface coating will be affected. u Wipe the coated door surfaces using a soft, clean cloth only. u Apply a stainless steel cleaner only to the stainless steel side walls evenly, wiping with the grain. Subsequent cleaning becomes easier as a result. u Wipe side walls with a paint finish using a soft, clean cloth only.
Putting into operation u Unscrew Fig. 6 (29)the bearing element Fig. 6 (28) transfer it to the opposite location hole of the turn hinge and screw it firmly into place. u Re-insert the stopper Fig. 6 (21) into the other hole. u Carefully lift off the cover on the handle side Fig. 6 (27) and transfer it to the opposite side. u Screw the turn hinge Fig. 6 (25) firmly into place on the new hinge side, possibly using a cordless screwdriver (with 4 Nm). u Re-insert the bearing pin Fig.
Control 4.5 Disposing of packaging WARNING Risk of injury due to the door dropping out! If the bearing parts are not screwed into place firmly enough, the door may drop out. This may lead to severe injuries. What is more, the door may not close and therefore the appliance may fail to cool properly. u Screw the turn hinges firmly into place with 4 Nm. u Check all of the screws and retighten if necessary. 4.
Control w The display indicates c. w The menu symbol Fig. 3 (5) shines. u Using the Up setting button Fig. 3 (7) and Down setting button Fig. 3 (6), select h. u To confirm: briefly press the SuperCool button Fig. 3 (2). u To set the display brighter: press the Up setting button Fig. 3 (7). u To set the display darker: press the Down setting button Fig. 3 (6). u To confirm: briefly press the SuperCool button Fig. 3 (2). w The brightness is adjusted to the new value.
Control Cooling with SuperCool u Briefly press SuperCool button Fig. 3 (2). w The SuperCool symbol Fig. 3 (11) lights up in the display. w The cooling temperature drops to the coldest value. SuperCool is activated. w SuperCool is automatically deactivated after 6 to12 hours The appliance continues to operate in the energy-saving, normal mode. To prematurely deactivate SuperCool u Briefly press SuperCool button Fig. 3 (2). w The SuperCool symbol Fig. 3 (11) goes out in the display.
Control u The door racks can be dismantled for cleaning. Standard values for storage time at high humidity 5.4.8 Removing the bottle holder Vegetables, salad u Always take hold of the bottle holder on the plastic part. 5.5 BioFresh compartment The BioFresh compartment allows some types of fresh food to be stored up to three times longer than in conventional refrigerators, without compromising quality. For food with an indicated best before date, the date specified on the packaging always applies. 5.5.
Maintenance You can adjust the temperature slightly colder or warmer. The temperature can be adjusted from b1 (coldest temperature) to b9 (warmest temperature). The presetting is b5. At the b1 to b4 settings the temperature may drop below 0 ° C and therefore the food may freeze slightly. Note for testing institutes: If temperatures below 3 °C are to be reached in the refrigerator compartment: u set the temperature in the BioFresh compartment to b1-b4.
Malfunction NOTICE* The stainless steel doors are provided with a high-quality surface coating and must not be treated using the accompanying care product. Otherwise the surface coating will be affected. u Wipe the coated door surfaces using a soft, clean cloth only. In case of stubborn dirt, use a little water or a neutral cleaning agent. A microfibre cloth can be optionally used. u If the stainless steel side walls are dirty, clean them using a commercially available stainless steel cleaning agent.
Decommissioning The temperature display indicates: F0 to F9 → There is a fault. u Please contact the after-sales service (see Maintenance). DEMO shines in the temperature display. → The demo mode is activated. u Please contact the after-sales service (see Maintenance). The outer surfaces of the appliance are warm*. → The heat of the refrigeration circuit is used to prevent condensate from forming. u This is normal. The temperature is not cold enough. → The door of the appliance is not properly closed.
Disposing of the appliance * Depending on model and options 15
Liebherr Hausgeräte Ochsenhausen GmbH * Memminger Strasse 77-79 * 88416 Ochsenhausen * Deutschland * www.liebherr.
