Manual

R 9150 21
Seite ist rechts 15 mm schmäler (Klappseite)
Shovel Attachment
with Shovel Boom 5,30 m/17’4”
m
ft
0
-5
-4
-3
-2
-1
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
mft
45
40
35
30
25
20
15
10
5
0
-5
-10
-15
12345678910111213
051015202530354045
T
R0204
Operating Weight and Ground Pressure
The operating weight includes the basic machine with shovel
attachment and a 8,00 m
3
/10.5 yd
3
bucket.
Undercarriage HD
Pad width mm/ft in 600/1’11” 750/2’5”
Weight kg/lb 130.000/286,600 133.400/294,100
Ground pressure * kg/cm
2
/ psi 1,90/27.02 1,56/22.20
* according to ISO 16754
Digging Envelope
Stick length 3,80 m/12’ 5”
Max. reach at ground level 10,25 m/36’10”
Max. dump height 8,55 m/28’
Max. crowd length 4,10 m/13’ 5”
Bucket opening width T 2.150 mm/ 7’
Max. crowd force at ground level (ISO 6015) 650 kN/146,126 lbf
Max. crowd force (ISO 6015) 779 kN/175,126 lbf
Max. breakout force (ISO 6015) 720 kN/161,862 lbf
Bottom Dump Buckets
For materials classe
according to VOB, Section C, DIN 18300 < 5 < 5 5 – 6 5 – 6 5 – 6 5 – 6 7 – 8 7 – 8 7 – 8
Typical operation
according to VOB, Section C, DIN 18300 GP GP HD HD HD HD XHD XHD XHD
Capacity ISO 7546 m
3
9,30 8,90 8,90 8,30 7,70 7,00 8,30 7,70 7,00
yd
3
12.2 11.6 11.6 10.9 10.1 9.2 10.9 10.1 9.2
Suitable for material up to a specific weight of t/m
3
1,6 1,7 1,6 1,8 2,0 2,4 1,7 1,85 2,25
lb/yd
3
2,698 2,867 2,698 3,035 3,373 4,047 2,867 3,120 3,794
Cutting width mm 2.900 2.900 2.900 2.900 2.900 2.600 2.900 2.900 2.600
ft in 9’6” 9’6” 9’6” 9’6” 9’6” 8’6” 9’6” 9’6” 8’6”
Weight kg 13.500 13.100 14.020 13.250 12.920 11.550 14.180 13.800 12.500
lb 29,762 28,881 30,909 29,211 28,484 25,463 31,262 30,424 27,558
Wear kit level I I II II II II III III III
GP: General purpose bucket with Liebherr Z100 teeth
HD: Heavy-duty bucket with Liebherr Z110 teeth
XHD: Heavy-duty rock bucket with Liebherr Z110 teeth
Level I: For non-abrasive materials, such as limestone, without flint inclusion, shot material or easily breakable rock,
i.e. deteriorated rock, soft limestone, shale, etc.
Level II: For preblasted heavy rock, or deteriorated, cracked material (classification 5 to 6, according to DIN 18300)
Level III: For highly-abrasive materials such as rock with a high silica content, sandstone etc.
NTB_R9150_T_enGB-US_Druck.indd 21 11.06.14 11:05