Install Guide

Click cover into place.

Insert the door racks.

Insert the hooks of the rack into the

openings of the clip-in strip at the

desired height and push down.

IMPORTANT

Be sure each door rack is fixed

properly in the clip-in strip.

Important Note for Changing

over Door Hinges or Limiting the

Hinges to a 90° Opening Angle

Changing the door hinges or limiting the hinges to a 90°

opening angle should only be carried out by a trained

expert.

The door hinges are fitted with strong closing springs. If

the hinge accidentally snaps shut, this can lead to seri-

ous injury.

The door itself is very heavy. Do not try to dismount the

door yourself.

Contact the Liebherr service for more information. See

contact details on the back of this manual.

Please note in case of removing

appliance from the recess

If the appliance has to be removed from the recess

again, please make sure you take account of the follow-

ing.

1. Remove the mounted front panel from the appliance

door.

2. Lower the appliance using the height adjustment unit.

DANGER!

Risk of death or serious injury due to

appliance tipping.

Do not remove the appliance without the

mounted transit supports.

3. Mount the transit supports with

two screws for each support using

a Torx 25 key.

nStallatIon