Install Guide

Align the panel hori-

zontally with the long

holes in the attach-

ment bracket.

Tighten the hex

nuts. Use the 10 mm

wrench provided.

Align the panel in its vertical

position if necessary.

Align the panel in its

depth.

Loosen the screws,

align the panel and

tighten the screws.

Fasten the panel through the bottom attachment brack-

et with two screws 4 x 14.

Align the panel in its depth at the bottom.

Loosen the screws, align the panel and tighten the

screws. Use the Torx 20 key provided.

Loosen the hex nuts

and turn the adust-

ing bolts with the

Torx 15 key provided.

nStallatIon