Install Guide

Remove the transit supports
using the Torx 25 key.
Mount the ventilation grille with the grille
segments tilted down.
DANGER!
Risk of death or serious injury due to
appliance tipping.
Do not open the appliance door before the
height adjustment is finished and the anti
tipping bracket supports the appliance.
Fasten the appliance in
the recess through the
appliance cover strips
using eight screws 4 x 14
for each side.
Close the front part of the appli-
ance cover strips.
Raise the appliance evenly by turning the screws seri-
ally until the appliance top back touches the anti-tipping
bracket (lift approx. 1/4" / 6.5 mm).
IMPORTANT
When turning the screws with a power driver please
consider absolutely.
Maximum rotation speed = 400 rpm
Maximum tourque = 8.8 lbs/in (1 Nm)
Failure to follow this instruction will result in
damage to the height adjustment unit.
Right
Turn counterclockwise
to raise the appliance.
Left
Turn clockwise to raise
the appliance.
12
I nStallatIon