Side by Side Installation

Loosen the protective foil of the

heating blanket top. Pull down the

foil for approx. 4" (100 mm). The

heating blanket is supplied with the

SBS kit.

IMPORTANT

Do not remove the protective foil

completely.

Adhere the heating blanket on the left side wall of the right appliance.

Upper edge of blanket 2 1/2" (63 mm) downwards from the the appli-

ance top.

Front edge of blanket 1-1/2" (32 mm) from the appliance housing

backwards.

Remove the protective foil a bit at a time as you go and flatten the

heating foil top down.

IMPORTANT

There should be no air pockets between heating foil and appliance

wall.

2. Mark the recess centerline on the back wall.

3. Mark a centerline on the left and right between the recess center-

line and the walls of the recess.

4. Position each anti-tipping bracket at the stated height and align

with the centerline.

5. Fasten the anti-tipping bracket through the outer left and

right and any other hole using the screws 6 x 60 provided

with the appliance.

Use appropriate anchors for concrete walls.