Installation Instructions

Insert the water filter as far as it will go
with the front knobs in a horizontal position
and turn clockwise until it snaps in.
Models MRB 3000 and MRB 3600 only
Route the power cord
towards the electrical outlet.
Route the water line towards
the water shut-off valve.
Slide the appliance into the
recess. To avoid damage,
move the power cord and the
water line at once.
Recess
Top view
Open the door and
remove the transit
support.
Remove the tapes.
Apply the appliance cover strips to
the left and right front edge of the
appliance housing, align in height
with the top profile and screw into
place. The strip is transparent so
the designed mounting holes on
the appliance housing are visible.
Remove the mounting strip from the
attachment bracket, turn 180° and insert
into the attachment bracket as far as it
will go.
Inset 3/4" (19 mm) panel
X = 2
1
/
2
" (63 mm)
Inset 5/8" (16 mm) panel
X = 2
3
/
8
" (60 mm)
Frameless
X = 1
3
/
4
" (44 mm)
Align the appliance in
depth.
X = Recess front to
appliance housing front
(not cover strip)
11
I nStallatIon