Mobile Harbour Crane LHM 180 ( 76 t )
Main dimensions Bulk operation Load diagram 80 Heavy lift 76 70 Capacity (t) 60 on the ropes 50 40 motor grab 30 20 10 0 4-rope grab 0 5 10 15 20 25 30 35 40 Above quay max. 42 m (depending on grab) Eye level 17.6 m Boom fulcrum 12.5 m 23.
Bulk operation Maximum crane capacity 76 t Hook operation Grab operation on the ropes Outreach Standard Heavy lift 4-rope grab motor grab (m) (t) (t) (t) (t) 9 64.0 76.0 35.0 42.0 10 64.0 76.0 35.0 42.0 12 64.0 35.0 42.0 13 63.5 35.0 42.0 14 58.9 35.0 41.9 15 54.7 35.0 38.9 16 50.6 35.0 36.0 17 46.9 33.3 33.3 18 43.5 30.9 30.9 19 40.2 28.6 28.6 20 37.1 26.4 26.4 21 34.9 24.8 24.8 22 32.3 23.0 23.0 23 30.4 21.6 21.6 24 28.4 20.2 20.2 25 26.8 19.0 19.0 26 25.1 17.8 17.8 27 23.8 16.9 16.9 28 22.3 15.9 15.
Main dimensions Container operation Load diagram 80 Heavy lift 76 70 Capacity (t) 60 on the ropes 50 40 se mi -a 30 20 10 0 uto ma tic automatic spreader 0 5 10 15 20 25 spre a der 30 35 40 Above quay max. 42 m Feeder Vessel 10 m 4 LHM 180 Below quay 12 m Eye level 17.6 m Boom fulcrum 12.5 m 23.
Container operation Maximum crane capacity 76 t Hook operation on the ropes Outreach Standard Heavy lift (m) (t) (t) 9 64.0 76.0 10 64.0 76.0 11 64.0 12 64.0 13 63.5 14 58.9 15 54.7 16 50.6 17 46.9 18 43.5 19 40.2 20 37.1 21 34.9 22 32.3 23 30.4 24 28.4 25 26.8 26 25.1 27 23.8 28 22.3 30 20.0 32 18.0 34 16.2 35 15.3 Capacity under 40´ spreader semiautomatic automatic (t) (t) 41.0 36.0 41.0 36.0 41.0 36.0 41.0 36.0 41.0 36.0 41.0 36.0 41.0 36.0 39.4 36.0 35.7 36.0 32.3 36.0 29.0 35.4 25.9 32.3 23.7 30.1 21.
Undercarriage Mobility Modular propping system • Outstanding mobility and manoeuvrability • Curves at any possible radii and even slewing on the spot • Minimised stress and strain of undercarriage due to cruciform support base which directs the load path from boom tip to quay • Modular system allows further reduction of quay loads by installing additional axle sets • Easy adaptation to various sizes of support pads and bases Optional wheel sets longitudinally diagonally 10 m 0.8 m 5. 5 m 5.
Technical data Capacity and Classification Capacity Classification Grab operation < 24 t A8 Grab operation < 35 t A7 Standard 64 t A4 Heavy lift 76 t A3 Propping arrangements Standard supporting base 10 m x 10 m Standard pad dimension 4 x 5.5 m x 0.8 m Standard supporting area of pads 4.4 m2 Optional size of supporting pads and bases on request Quay load arrangements Main dimensions Min. to max.
Liebherr develops and produces special designs and solutions to meet customer-specific requirements • • The Liebherr Portal Crane, LPS, is an efficient combination of a space-saving portal (mounted on rails) and the proven mobile harbour crane concept. Particularly on narrow quays, individual portal solutions permit (railway) trains and (road) trucks to travel below the portal.
