Mobile Harbour Crane LHM 180
Main dimensions Bulk operation Load diagram 70 Capacity (t) 60 on the ropes 50 40 motor grab 30 20 10 0 4-rope grab 0 5 10 15 20 25 30 35 40 Above quay max. 42 m (depending on grab) Eye level 17.6 m Boom fulcrum 12.5 m 23.
Bulk operation Maximum crane capacity 64 t Hook operation Maximum crane capacity 42 t Grab operation Hook operation Grab operation Outreach on the ropes 4-rope grab motor grab Outreach on the ropes 4-rope grab motor grab (m) (t) (t) (t) (m) (t) (t) (t) 9-12 64.0 35.0 42.0 9-12 42.0 24.0 30.0 13 63.5 35.0 42.0 13 42.0 24.0 30.0 14 58.9 35.0 41.9 14 42.0 24.0 30.0 15 54.7 35.0 38.9 15 42.0 24.0 30.0 16 50.6 35.0 36.0 16 42.0 24.0 30.0 17 46.9 33.
Main dimensions Container operation Load diagram 70 Capacity (t) 60 on the ropes 50 40 se mi -au tom atic spre ader automatic spreader 30 20 10 0 0 5 10 15 20 25 30 Above quay max. 42 m Boom fulcrum 12.5 m Eye level 17.6 m 23.
Container operation Maximum crane capacity 64 t Hook operation Maximum crane capacity 42 t Capacity under 40´ spreader Hook operation Capacity under 40´ spreader Outreach on the ropes automatic semi-automatic Outreach on the ropes automatic semi-automatic (m) (t) (t) (t) (m) (t) (t) (t) 9 64.0 41.0 36.0 9 42.0 31.5 36.0 10 64.0 41.0 36.0 10 42.0 31.5 36.0 11 64.0 41.0 36.0 11 42.0 31.5 36.0 12 64.0 41.0 36.0 12 42.0 31.5 36.0 13 63.5 41.0 36.0 13 42.
Undercarriage Mobility Modular propping system • Outstanding mobility and manoeuvrability • Curves at any possible radii and even slewing on the spot • Minimised stress and strain of undercarriage due to cruciform support base which directs the load path from boom tip to quay • Modular system allows further reduction of quay loads by installing additional axle sets • Easy adaptation to various sizes of support pads and bases Optional wheel sets longitudinally diagonally 10 m 0.8 m 5. 5 m 5.
Technical data Capacity and Classification Capacity Classification Grab operation < 24 t A8 Grab operation < 35 t A7 Container < 35 t A7 Heavy lift 64 t A4 Propping arrangements Standard supporting base 10 m x 10 m Standard pad dimension 4 x 5.5 m x 0.8 m Standard supporting area of pads 4.4 m2 Optional size of supporting pads and bases on request Quay load arrangements Main dimensions Min. to max.
Practical solutions • The Liebherr Portal Crane, LPS, is an efficient combination of a space-saving portal (mounted on rails) and the proven mobile harbour crane concept. Particularly on narrow quays, individual portal solutions permit (railway) trains and (road) trucks to travel below the portal. Liebherr-Werk Nenzing GmbH P.O. Box 10, A-6710 Nenzing/Austria Tel.: +43 50809 41-725 Fax: +43 50809 41-447 mobile.harbour.crane@liebherr.com www.liebherr.
