Manualshelf

User Manual

ManualsBrandsLiebherr ManualsEquipmentLH 80 C Litronic
11121314151617181920
L0007.01
L
F
A
E
D
C
B
J
K
G
I
H
PK 45º
PK-HL 45º
L0008.01
L
F
E
A
PK 40º
PK-HL 35º
11
Special timber handling machines from Liebherr
L 524 - L 542
Light Material Bucket High-Dump Bucket
Light Material Bucket
with Bolt-On Cutting Edge
L 524 L 528 L 538 L 542
STD HL STD HL STD HL STD HL
Bucket capacity m
3
5.5 4.0 6.0 4.5 6.5 5.0 7.0 5.5
Bucket width mm 2,750 2,750 2,750 2,750 2,750 2,750 2,750 2,750
Specific material weight t/m
3
0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5
A
Dumping height at max. lift height mm 2,230 3,050 2,185 2,980 2,185 2,960 2,135 2,855
E Max. operating height mm 5,670 5,950 5,450 6,050 5,925 6,140 5,980 6,250
F Reach at max. lift height mm 1,630 1,355 1,680 1,425 1,650 1,404 1,700 1,505
L Overall length mm 7,930 8,265 8,000 8,365 8,250 8,635 8,320 8,780
Tipping load, straight * kg 7,330 5,760 8,340 6,610 9,400 7,600 10,060 8,090
Tipping load, articulated at 40° * kg 6,470 5,090 7,370 5,840 8,300 6,700 8,870 7,130
Operating weight * kg 12,200 12,400 12,900 13,100 13,950 14,150 14,420 14,630
Tyre sizes 17.5R25 L3 17.5R25 L3 20.5R25 L3 20.5R25 L3
High-Dump Bucket
with Bolt-On Cutting Edge
L 524 L 528 L 538 L 542
STD HL STD HL STD HL STD HL
Bucket capacity m
3
5.0 3.5 5.5 4.0 6.0 4.5 6.7 5.0
Bucket width mm 2,700 2,500 2,700 2,700 2,700 2,700 2,950 2,700
Specific material weight t/m
3
0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5
A
Dumping height at max. lift height mm 4,479 5,260 4,457 5,260 4,480 5,269 4,417 5,246
E Max. operating height mm 6,500 6,915 6,630 6,975 6,755 7,085 6,820 7,160
F Reach at max. lift height mm 1,639 1,468 1,666 1,468 1,613 1,446 1,600 1,479
L Overall length mm 7,839 8,357 7,874 8,357 8,094 8,612 8,194 8,652
Tipping load, straight * kg 6,845 5,180 8,030 6,050 9,260 7,050 9,800 7,620
Tipping load, articulated at 40° * kg 6,040 4,570 7,090 5,340 8,160 6,220 8,640 6,720
Operating weight * kg 12,650 12,800 13,330 13,490 14,320 14,540 14,930 15,050
Tyre sizes 17.5R25 L3 17.5R25 L3 20.5R25 L3 20.5R25 L3
* The figures shown include the above tyres, all lubricants, a full fuel tank, the ROPS/FOPS cab and the operator. Different tyres and optional
equipment will change the operating weight and tipping load. (Tipping load, articulated at 40° according to ISO 14397-1)
STD = parallel linkage
HL = parallel linkage, high lift version