Use and Care Manual
15
operaTion 
 = Door gasket heating control 
Condensed water on the gasket of the refrigerator doors 
can be eliminated by activating the door gasket heating.
How to activate the door gasket heating
• ActivatethesetupmodebytouchingtheSuperfrost 
icon for 5 seconds
• Touch the freezer compartment Down icon until 
appearsinthefreezertemperaturedisplay.
• TouchtheSuperfrost icon
- the display shows 
• Touchfreezer compartment 
 Up/Down icons to select
 = at slight condensation of the gasket
 = at heavy condensation of the gasket
 = heating off
• TouchtheSuperfrost icon at the desired value.
• Exitsetupmodebytouchingthefreezercompartment
On/Off icon.
 = Display brightness
How to adjust the display brightness
• ActivatethesetupmodebytouchingtheSuperfrost 
icon for 5 seconds.
• Touch the freezer compartment Down icon until 
appearsinthefreezertemperaturedisplay.
• TouchtheSuperfrost icon
- the display shows 
• Touchfreezer compartment 
 Up/Down icons to select
 0 = minimum to
   5 = maximum brightness 
• TouchtheSuperfrost icon at the desired value.
• Exitsetupmodebytouchingthefreezercompartment
On/Off icon.
 = ResetairfilterLED
Aftertheairfilterinthetoekickareahasbeencleaned
theairfilterLEDmustbereset.Forhowtocleantheair
filterrefertochapter“Cleaning”.
HowtoresettheairfilterLED
• ActivatethesetupmodebytouchingtheSuperfrost 
icon for 5 seconds.
• Touchthefreezer compartment Down icon until 
appearsinthefreezertemperaturedisplay.
• TouchtheSuperfrost icon
  - the display shows 
• TouchtheSuperfrost icon again
  - the display shows 
• TheairfilterLED  disappears. 
• Exitsetupmodebytouchingthefreezercompartment
On/Off icon.
Figure 10
SuperFrosticon
FreezerOn/Officon
FreezercompartmentUp/Downicons
Freezertemperature 
display










