Operating Instructions

17
Bottle tray
The tray above the
BioFreshcompartment
can be used for storing
bottleshorizontally.
Removeglassplateand
reinsert under the tray -
Figure 19.
r efrigeraTor C omparTmenT
Figure 19
Figure 20
The cavities in the plate
ensures secure place-
ment of the bottles -
Figure 20.
IMPORTANT
When storing tall
bottles horizontally, the
gallon rack must be
relocated to a higher
position.
If you need space for large bottles and con-
tainers.
Placetheshelfrailspro-
vided on the supports
on the left and right at
the desired height -
Figure 17.
Inserttheglassshelves
as shown in figure 18.
The glass shelf with the
raised edge must go at
the back.
Ifyouneedtomake
space for tall containers,
simply slide the front
half of the sectioned
glass shelf carefully
underneath the back half
- Figure 18.
Removing the shelves - Figure 16
1.Followthefirstthreestepsinthechapterabove.
2.Lifttheshelfdownandstopjustovertheupperveg-
etable bin.
3.Movethefrontoftheshelfupwardsuntiltheshelfis
in a vertical position.
4. Turn the shelf out at left and remove.
Repositioning the shelves - Figure 15
1. Hold the shelf underneath with your hand to avoid
from tipping down backwards when removing.
2.Lifttheshelfatthefront.
3.Removetheshelfforwarduntilthecircularcutoutof
the shelf is in line with the interior light cover.
4.Lifttheshelfupordownandreplaceinthedesired
position.
Figure 15
Interiorlightcover
Figure 16
Figure 17
Figure 18