Assembly and installation instructions

Mounting the Freezer Drawer

Panels - Figure 43

1. Pull out the upper freezer drawer and screw on the

panel with three screws on the left and right sides

using the screws as shown in Figure 43.

2. Close the drawer and check the position to the sur-

rounding cabinet panels. Align the panel in vertical

direction by loosening the screws left and right.

Finally tighten the screws.

IMPORTANT

Do not overtighten. Do not use a power driver.

3. Pull out the lower freezer drawer and fasten the

lower panel in the same way.

4. Finally cover the gap between the drawer and the

panel of both freezer drawers with the strips pro-

vided. Remove the foil from the adhesive surface of

the strip and stick on the top of the appliance drawer

making sure the flexible gasket is fully inserted in the

gap.

3.5 x 13 mm screw

Figure 43

nStallatIon