Assembly and installation instructions

6. Insert the locking pins to block the

supports (Figure 29).

Mounting the Ventilation Grille

1. Pull out the bottom freezer drawer.

2. Remove the blue protection film from the dust filter

provided and insert the filter into its opening in the

toe kick area as shown in Figure 25. Engage

the filter at the bottom, press down the

button and click into place.

4. Insert the supports for the ventilation grille on the left

and right sides in the motor compartment

(Figure 27).

Figure 25

Figure 27

5. The front edge of the

brackets is flush with the

front of the ventilation

grille. Adjust the supports

accordingly (Figure 28).

Figure 28

Figure 26

3. Remove the locking pins of both supports. The sup-

ports are provided with the appliance accessory

pack (Figure 26).

Figure 29

nStallatIon