Manualshelf

Spec Sheet

ManualsBrandsLiebherr ManualsBuilt-In Bottom Freezer RefrigeratorsLiebherr 30" Built-In Panel Ready Bottom Freezer Refrigerator
1234
Subject to modification. For up-to-date information, visit home.liebherr.com.
Unit Dimensions
Panel Dimensions
Cabinet Opening Dimensions
Adjusting range of ventilation grille
1-5/8" min. > 3" max.
The height of this panel can be reduced by up to 2" to accommodate higher toe kicks
Cabinet opening A
Refrigerator door panel B
80" 45-1/4" (1150 mm)
84" 49-1/4" (1251 mm)"
Cabinet opening A
Refrigerator door panel B
80" 45-3/4" (1162 mm)
84" 49-3/4" (1264 mm)"
30" Single
60" Side by Side
Water supply line
Inset cabinet Depth D
Frameless cabinet Depth D
24" + panel thickness 24"
Hinge
Door
Height can be increased by 1-1/2"
(40 mm) by turning the levelling
feet at the front and the height
adjustable roller units at the
appliance rear.
Allow door swing clearance at locations
next to a wall.
The refrigerator door must open to a minimum
of 90° to allow the crispers to open and the
shelves to be removed.
Minimum panel thickness is 5/8" (16 mm).
Maximum panel thickness is 1-1/2" (38 mm).
Maximum weight of the refrigerator panel is
60 lbs (27 kg).
Maximum weight of each freezer panel is
26.5 lbs (12 kg).
Minimum panel thickness is 5/8" (16 mm).
Maximum panel thickness is 1-1/2" (38 mm).
Maximum weight of the refrigerator panel is
60 lbs (27 kg).
Maximum weight of each freezer panel is
26.5 lbs (12 kg).
Inset Installation Style Frameless Installation Style
IMPORTANT
Factory available stainless steel panels are designed
for an inset installation only and require a
cabinet / gable depth of 24 - 3/4".
30"
Diagrams
HCB 1581
Fully Integrated/Seamless

Summary of content (4 pages)