Installation Guide
Figure 12
Cover strips - Figure 12
Before connection to the water supply, the cover strips
provided must be fitted to the appliance. It is necessary
because the appliance will be moved into its recess.
• Removethecoverbandfromthestripsandstick
them to the left and right front edge of the appli-
ance housing (Figure 12).
Mounting the anti tipping device
in cabinets deeper than 24" -
Figure 10 - 11
To ensure the compressor mounting plate reaches the
anti tipping bracket in cabinets deeper than 24", a wood-
en spacer must be mounted between the appliance back
and the wall. The anti tipping bracket will be fastened to
the floor downwards and to the spacer backwards.
Be sure the wooden spacer is fastened
securely to the floor.
Figure 10
Measuring for mounting the wooden spacer on
frameless kitchen cabinets - Figure 11
Figure 11
Panel thickness
Depth of spacer depending on clear-
ance between appliance and wall
Depth of spacer depending on clear-
ance between appliance and wall
Measuring for mounting the wooden spacer on
inset kitchen cabinets - Figure 10
IMPORTANT
If the floor slopes down sideways, the anti-tipping
bracket must be fitted horizontally. Lay down spacers
in the appropriate positions.
9
BlockIng for Safety