User guide

ER 934 C ER 944 C ER 954 C Material Handlers 17
ER 934 C
Lift Capacities
with Industrial-Type Straight Mono Boom 8.60 m
Industrial Stick 6.00 m (Variant 2A)
3.0 m 4.5 m 6.0 m 7.5 m 9.0 m 10.5 m 12.0 m 13.5 m 15.0 m
Under-
m carriage m
16.5 EW
15.0 EW
13.5 EW
12.0 EW
10.5 EW
9.0 EW
7.5 EW
6.0 EW
4.5 EW
3.0 EW
1.5 EW
0 EW
– 1.5 EW
– 3.0 EW
– 4.5 EW
9.9* 9.9* 7.7* 7.7* 6.0
9.6* 9.6* 8.1* 8.1* 6.2* 6.2* 8.5
9.3* 9.3* 8.0* 8.0* 5.5* 5.5* 10.2
9.2* 9.2* 8.1* 8.1* 6.3 6.8 5.2* 5.2* 11.5
9.3* 9.3* 8.1* 8.1* 6.3 6.8 5.0 5.4 4.6 4.9* 12.5
11.3* 11.3* 9.5* 9.5* 8.0 8.2* 6.2 6.8 5.0 5.4 4.1 4.5 13.2
12.3* 12.3* 11.9* 11.9* 9.8* 9.8* 7.8 8.4* 6.1 6.6 4.9 5.3 4.0 4.3 3.8 4.2 13.7
24.9* 24.9* 16.7* 16.7* 12.6* 12.6* 9.9 10.2* 7.5 8.1 5.9 6.4 4.8 5.2 3.9 4.3 3.6 4.0 14.1
17.9* 17.9* 12.9 13.2* 9.3 10.2 7.1 7.8 5.7 6.2 4.6 5.1 3.9 4.2 3.5 3.9 14.3
5.8* 5.8* 12.0 13.2* 8.8 9.7 6.8 7.5 5.5 6.0 4.5 4.9 3.8 4.1 3.5 3.8 14.3
4.9* 4.9* 11.4 12.5* 8.4 9.2 6.5 7.2 5.3 5.8 4.4 4.8 3.7 4.1 3.5 3.7* 14.1
5.6* 5.6* 11.1* 11.1* 8.1 9.0 6.4 7.0 5.2 5.7 4.3 4.8 3.6* 3.6* 3.5* 3.5* 13.5
9.0* 9.0* 7.7* 7.7* 6.3 6.4* 5.1 5.2* 4.1* 4.1* 11.9
Industrial Stick 7.50 m (Variant 2A)
3.0 m 4.5 m 6.0 m 7.5 m 9.0 m 10.5 m 12.0 m 13.5 m 15.0 m
Under-
m carriage m
16.5 EW
15.0 EW
13.5 EW
12.0 EW
10.5 EW
9.0 EW
7.5 EW
6.0 EW
4.5 EW
3.0 EW
1.5 EW
0 EW
– 1.5 EW
– 3.0 EW
– 4.5 EW
6.8* 6.8* 6.5* 6.5* 6.2
7.0* 7.0* 5.1* 5.1* 9.0
7.8* 7.8* 6.8* 6.8* 5.1* 5.1* 4.5* 4.5* 10.8
7.5* 7.5* 6.6* 6.6* 4.6* 4.6* 4.1* 4.1* 12.2
7.5* 7.5* 6.6 6.7* 5.2 5.6 3.9* 3.9* 13.3
7.5* 7.5* 6.6 6.7* 5.2 5.6 4.2 4.5 3.7 3.8* 14.2
8.7* 8.7* 7.6* 7.6* 6.5 6.8* 5.1 5.6 4.1 4.5 3.4 3.7* 14.8
9.1* 9.1* 7.9* 7.9* 6.3 6.8 5.0 5.5 4.1 4.5 3.3 3.7 3.2 3.5 15.3
10.7* 10.7* 9.5* 9.5* 7.8 8.1* 6.1 6.6 4.9 5.3 4.0 4.4 3.3 3.6 3.1 3.4 15.6
19.2* 19.2* 16.4* 16.4* 12.4* 12.4* 9.8 10.0* 7.4 8.1 5.8 6.4 4.7 5.1 3.9 4.3 3.2 3.6 3.0 3.3 15.7
2.7* 2.7* 17.6* 17.6* 12.7 13.0* 9.1 10.0 7.0 7.7 5.6 6.1 4.5 5.0 3.8 4.1 3.2 3.5 2.9 3.2 15.8
2.2* 2.2* 7.2* 7.2* 11.8 13.0* 8.6 9.5 6.6 7.3 5.3 5.8 4.4 4.8 3.7 4.0 3.1 3.4 2.9 3.2* 15.6
2.9* 2.9* 6.1* 6.1* 11.2 12.3* 8.1 9.0 6.3 7.0 5.1 5.6 4.2 4.7 3.6 4.0 3.1 3.3* 2.9* 2.9* 15.3
6.4* 6.4* 10.8 10.9* 7.9 8.7 6.1 6.8 5.0 5.5 4.2 4.6 3.5 3.8* 3.2* 3.2* 14.2
8.9* 8.9* 7.5* 7.5* 6.1 6.2* 4.9 5.1* 4.0* 4.0* 3.7* 3.7* 12.3
Height Can be slewed through 360° In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity
The lift capacities are stated in metric tonnes (t) on the lifting gear’s stick tip, and can be lifted 360° on firm, level supporting surface. Capacities
are valid for 600 mm wide triple grouser pads. Indicated loads are based on ISO 10567 standard and do not exceed 75 % of tipping or 87 % of
hydraulic capacity (indicated via *). Lifting capacity of the excavator is limited by machine stability, hydraulic capacity and maximum permissible
load of the load hook.
According to European Standard, EN 474-5: In the European Union excavators have to be equipped with an overload warning device, a load
diagram and automatic safety check valves on hoist cylinders and stick cylinder(s), when they are used for lifting operations which require the use
of lifting accessories.