Electric Material Handler Product Information ER 934 C Operating Weight: 37,900 - 38,400 kg Operating Weight: 160 kW / 217 HP
ER 934 C Working radius: Motor rating: Weight: 2 ER 934 C Material Handlers 13 - 16 m 160 kW / 217 HP 37,900 kg - 38,400 kg
Performance These new electric Material Handlers have been designed to meet the specific needs of industrial handling. The considerable advantage of the semi-stationary machine is its mobility; a result of the crawler undercarriage. The material-handling machine can be ideally placed in the application area’s existing infrastructure without the necessity for any alterations or rebuilding measures.
ER 934 C – an Overview Hydraulic Cab Elevation for an excellent view of the working area and fatiguefree working (optional) Wide range of solutions • Modular arrangement for rapid changeover • Liebherr quick-coupling system, mechanical and hydraulic, for efficient equipment changeover • Quick-coupling arrangement for hydraulic lines (Multi-Coupler) • Complete range of grapples • Range of different wood grapples and grab buckets from Liebherr Reliability - Safety • Automatic Power cut off if the cabinet d
Kinematic chain made by Liebherr • Constant provision of power for the kinematic chain • Reduced wear of hydraulic components • Optimum exploitation of the hydraulic power potential of the system Cooling system • Generous dimensions for high cooling capacity • Vertical arrangement for increased efficiency and minimal incursion of foreign bodies • Powered by a thermostatically regulated hydraulic motor • Reversible actuation of the fan (without time limit) as option Distributor • Fine response of hydraulic
Technical Data Electric Motor Motor ������������������������������� asynchronous three-phase, cage rotor enclosed in cast iron envelope, special Liebherr design Power rating (as per CEI 34-1) ����������������� 160 kW (217 HP) at 1,489 RPM Rated voltage ��������������������� 400 V – 50 Hz * Number of poles ������������������ 4 Design type ������������������������ horizontal axle B35 axle height 315 mm painting: RAL 7031 Standard degree of protection �� IP55 – steel flange FF600 Insulation �������������������
Industrial Attachment with Industrial-Type Straight Boom 8.60 m ft m Attachment Envelope 18 50 Kinematic variant 2A 16 1 with industrial stick 7.50 m 2 with industrial stick 7.50 m and grapple model 65 14 40 12 10 30 Operating Weight and Ground Pressure 8 20 6 Operating weight includes basic machine with hydraulic cab elevation, counterweight 7.5 t, industrial-type straight boom 8.60 m, industrial stick 7.50 m and grapple model 65 with 5 semi-closed tines 0.60 m3.
Hydraulic Cab Elevation D2 D1 C2 EW 2,660 mm 5,160 mm 3,160 mm 5,660 mm 1,485 mm 1,730 mm 3,080 mm B1 B2 C1 C2 D1 D2 E B2 C1 B1 E Variety of Tools Shells for Loose Material Clamshell Model 20 B Shells for loose material with cutting edge (without teeth) 1,600 2.00 1.5 1,550 Cutting width of shells mm 1,000 Capacity m3 1.30 For loose material, specific weight up to t/m3 1.5 Weight kg 1,355 1,200 1.50 1.5 1,415 Multiple Tine Grapples semi-closed tines closed tines 0.40 1,055 0.40 1,285 0.
