Side-by-Side Installation

5
6.
Loosen the protective foil of the
heating blanekt top. Pull down the
foil for approx. 4".
important
Do not remove the protective foil
completely.
6.
7.
Adhere the heating blanekt on the top of the left unit.
Upper edge of blanekt 4-1/2" from the appliance top.
Front edge of blanekt 1-1/2" from the appliance housing
backwards.
Remove the protective foil a bit at a time as you go and
flatten the heating foil top down.
important
There should be no air pockets between heating foil and
appliance wall.
7.
note
Step 5 is for HC (fully integrated) appli-
ances only.
5. Remove the inner supports.
5.