Installation Instructions

7
BlockIng for Safety
Mounting the anti tipping device
in cabinets deeper than 24" -
Figure 9
To ensure the compressor mounting plate reaches
the anti tipping bracket at cabinets deeper than 24", a
wooden spacer must be mounted between the appli-
ance back and the wall. The anti tipping bracket will
be fastened to the floor downwards and to the spacer
backwards.
Be sure the wooden spacer is fastened
securely to the floor.
Figure 9
Depth of spacer depending on clearence
between appliance and wall.
Mounting the top anti-tipping
bracket
1. Mount the anti-tipping bracket provided on the wall
using 6 x 60 screws (Figure 10).
2. Clip both attachment brackets into the
transport grips of the appliance (Figure
11) .
Side view
Figure 10
Figure 11