Installation Instructions

Leveling the Appliance - Figure 18
1. The height can be
adjusted in front by
twisting the leveling
feet
1
.
2. Twist the adjusting bolt
2
to set up the back
of the refrigerator.
3. Rotate leveling feet
1
until firmly in place
against the floor.
To prevent the appliance from tipping
forward the leveling feet
1
(Figure 18)
must have contact with the floor.
Mounting the Ventilation Grille -
Figure 20, 21
1. Pull out the bottom freezer drawer.
2. Remove the blue protection film from the dust filter
provided and insert the filter into its opening in the
toe kick area as shown in
Figure 20. Attach the
filter at the bottom, press down the button and click
into place.
3. Mount the ventilation grille as shown in Figure 21.
IMPORTANT
Only use the ventilation grille provided with the
appliance. This grille is required for proper operation
of the appliance.
The ventilation opening must not be covered with a
cabinet base.
Failure to use the supplied grille can result in
product failure and will void the warranty.
Figure 20
Figure 21
Figure 18
Top anti-tipping bracket
4. Secure the appliance with M5 x 7 screws
(
Figure 19).
Figure 19
10
InStallatIon