Installation Instructions

Mounting the top anti-tipping
bracket
1. Mount the anti-tipping bracket provided on the wall
using 6 x 60 screws (Figure 9).
2. Clip both attachment brackets into
the transport grips of the appliance
(Figure 10).
Side view
Figure 9
Figure 10
7
B lockIng for S afety
Mounting the anti tipping device
in cabinets deeper than 24" -
Figure 8
To ensure the compressor mounting plate reaches the
anti tipping bracket at cabinets deeper than 24", a wood-
en spacer must be mounted between the appliance back
and the wall. The anti tipping bracket will be fastened to
the floor downwards and to the spacer backwards.
Be sure the wooden spacer is fastened
securely to the floor.
Figure 8
Depth of spacer depending on
clearence between appliance and wall.