Installation Guide

Mounting the bracket with the wall
stud.
Mounting with wall plugs at concrete
walls (Figure 8).
Screws 6 x 63 mm
Mounting with the wall plate
turning in the screws at an angle
(Figure 9).
Screws 6 x 63 mm
Mounting with wooden floors
(Figure 10).
Screws 6 x 63 mm
Mounting with concrete floors using
the anchors provided (Figure 11).
Mounting Options
Semi built-in
With semi built-in applications the anti tipping
brackets must be mounted with a distance of
22 inches from the appliance housing front to the
back of the bracket (Figure 7).
The gap to the wall must be filled with a wooden
spacer to fasten the bracket.
WARNING!
Be sure the wooden spacer is fastened
securely to the floor.
1. Mark the center of the appliance on the back
wall.
2. Mount the wooden spacer.
3. Mount the anti tipping brackets within 11-3/4 inch
to the left and right of the appliance center.
IMPORTANT
To ensure a secure mounting of the brackets
use any possible mounting option as shown in
Figures 8 - 11.
NOTE
If longer or shorter screws are needed, they
have to be supplied by the installer.
7
BlockInG for safety
Figure 8
Figure 9
Figure 10
Figure 11
Figure 7