Installation Instructions

13
53. Pull the right-hand side of the
cover approx. 1/4" (6 mm) to-
wards you.
54. Move soft stop mechanism hinge
to the fastener and insert pin.
55. Remove red safety bracket.
56. Pivot door cover to the left and
click into place on the door.
57. Click cover into place.
58. Place the appliance in its final
position at the place of instal-
lation.
Extend the adjustable foot at
the bottom hinge bracket until
it rests on the floor and then
make a further 90° turn.
54.
53.
55.
56.
58.
49. Suspend top door on hinge pin.
For this, the door must be open at
least 90°.
49.
50. Secure door with screws and
click cover into place.
51. Click cover into place.
52. Slide door cover over soft stop
mechanism hinge.
50.
51.
52.
reversInG door HInGes
57.