Installation Instructions

Mounting the bracket with the wall
stud.
Mounting with wall plugs at concrete
walls (Figure 7).
Screws 6 x 63 mm
Mounting with the wall plate turning
in the screws angular (Figure 8).
Screws 6 x 63 mm
Mounting with wooden floors
(Figure 9).
Screws 6 x 63 mm
Mounting with concrete floors using
the anchors provided (Figure 10).
Mounting options
Semi built in
With semi built in applications the anti tipping
brackets must be mounted with a distance of
22 inches from the appliance housing front to the
back of the bracket. (Figure 6).
The gap to the wall must be filled with a wooden
spacer to fasten the bracket.
WARNING!
Be sure the wooden spacer is fastened
securely to the floor and / or wall.
1. Mark the center of the appliance on the back
wall.
2. Mount the wooden spacer.
3. Mount the anti tipping brackets within 11-3/4 inch
to the left and right of the appliance center.
IMPORTANT
To ensure a secure mounting of the brackets
use any possible mounting option as shown in
Figures 7 - 10.
NOTE
If longer or shorter screws are needed, they
must be supplied by the installer.
Figure 7
Figure 8
Figure 9
Figure 10
Figure 6
7
BlockInG for safety