Installation Instructions

A = 79-1/2" (2020 mm)
B = 29-3/8" (747 mm)
C = 24-13/16" (630 mm)
D = 52-3/8" (1330 mm)
E = 31-3/32" (790 mm)
Unit Dimensions - Figure 1
Figure 1
Unit Venting - Figure 2
Do not restrict the air flow. The opening can either
be directly over the appliance
1
, above the cabinet
and below the ceiling
2
or through a vent installed
in a soffit
3
.
The cabinet height as specified at 80” (2032 mm)
will create a 1-5/16” (33 mm) gap above the
appliance providing optimal air flow over the top of
the appliance for its efficient operation.
Be sure to consider the possibility of having to
raise some of the leveling legs in order to level the
appliance when installing. If you adjust the height
of the appliance - it will effectively reduce air flow.
Therefore leave yourself some room for adjustment.
IMPORTANT
The section below the freezer door and the floor
must not be covered.
Figure 2
1
2
3
4
plannInG InformatIon
Overall height of the appliance can be increased by
a maximum of 5/8” (see Leveling the appliance).