Assembly and installation instructions

13
IMPORTANT
The door must now be held secure by another
person.
52. Suspend top door on hinge pin. For this,
the door must be open at least 90°.
52.
53. Secure door with screws
and click cover into place.
54. Plug in the connector and
insert the cable in the guide.
55. Click cover into place.
56. Slide door cover over soft stop
mechanism hinge.
53.
54.
55.
56.
57. Pull the left-hand side of the cover
approx. 1/4" (6 mm) towards you.
58. Move soft stop mechanism hinge
to the fastener and insert pin.
59. Remove red safety bracket.
60. Pivot door cover to the right
and click into place on the
door.
61. Click covers into place.
62. Place the appliance in its final
position at the place of installation.
Extend the adjustable foot at the
bottom hinge bracket until it rests
on the floor and then make a further
90° turn.
58.
57.
59.
60.
61.
62.
r everSIng D oor H IngeS