Design Guide

26
Freestanding/Semi Built In Models
The power cord exits
the rear of the appli-
ance at this location.
CS 1640B, CBS 1660, CBS 1661
CS 1410
The power cord exits
the rear of the appli-
ance at this location.
The water line lead out
position for CBS 1660
and CBS 1661 can be
within the shaded area.
Cabinet Opening Dimensions - 30" and 60" Models
The appliance can be used freestanding or semi built-in.
If semi built-in, consider the cabinet opening dimensions specified below.
IMPORTANT
Do not install the
shut-off valve for the
water supply behind
the appliance, to allow
access to the shut off
without having to pull
out the appliance.
Free length of the power cord is 90".
The electrical outlet must not be situated behind the appliance and must be easily accessible.
NOTE
If the gap between the rear of the appliance and the wall is less than
2 inch (51 mm), the power consumption level may increase.