Additional document

3
Figure 5
5. Attach the safety plates to the grille as
shown in
Figure 5 and fasten each using
two screws 2.9 x 9.5 provided.
Figure 6
6. Fit the appliance into the recess.
7. Click cover into place
Figure 6 .
Figure 3
3. Attach the cover angle to the grille as
shown in
Figure 4.
The holes of the angle must be in line
with the center of the support -
Figure 3 .
Figure 4
4. Fasten the cover angle
using five screws
2.9 x 9.5 provided -
Figure 4 .
The thread of the screws
fits into the gap of the
support.