Owner's Manual

11
o peraTion
= WaterquantityforIcecubetray
If the produced ice cubes of the ice maker are too
small, the inflowing water quantity can be adjusted.
• ActivatethesetupmodebytouchingtheSuperFrost
icon for 5 seconds.
• Touch the freezer compartment Down icon until
appears in the freezer temperature display.
• TouchtheSuperFrost icon
- the display shows
• Touchfreezer compartment Up icon
once only so E 4 appears in the display.
IMPORTANT
Do not increase for more than one step. If the
adjusted value is too high, the ice cube tray of the
ice maker could overflow.
• TouchtheSuperFrost icon again.
• Exitsetupmodebytouchingthefreezercompartment
On/Off icon.
Checktheicecubesizewithinthenextdays.Ifthe
ice cubes are still smaller as desired, follow the steps
above again.
= Ice maker function test
Activation by service personnel only.
= Drop symbol reset
After the Water filter
(optional
accessory)
has been changed the
drop symbol on the display must
be reset.
• ActivatethesetupmodebytouchingtheSuperFrost
icon for 5 seconds.
• Touchthefreezer compartment Down icon until
appears in the freezer temperature display.
• TouchtheSuperFrost icon
- the display shows
• TouchtheSuperFrost icon again
- the display shows
• Thedropsymboldisappears.
• Exitsetupmodebytouchingthefreezercompartment
On/Off icon.
= Temperature display mode
You can choose the unit of temperature for the display
in degrees Fahrenheit or degrees Celsius.
The factory setting is degrees Fahrenheit.
• ActivatethesetupmodebytouchingtheSuperFrost
icon for 5 seconds.
• Touchthefreezer compartment Down icon until
appears in the freezer temperature display.
• TouchtheSuperFrost icon
- the display shows
• TouchtheSuperFrost icon again
- the temperature reading is now displayed in degree
Celsius.
• Exitsetupmodebytouchingthefreezercompartment
On/Off icon.
• To change the temperature display back to degrees
Fahrenheit, follow the steps above.
= Biofresh temperature adjustment
You can adjust the temperature in the BioFresh drawers.
• ActivatethesetupmodebytouchingtheSuperFrost
icon for 5 seconds.
• Touchthefreezer compartment Down icon until
appears in the freezer temperature display.
• TouchtheSuperFrost icon
- the display shows
• Touchfreezer compartment Up/Down icons to
select
6 - 9 to increase the temperature,
4 - 1 to reduce the temperature.
IMPORTANT
At values b4 - b1 the temperature in the drawers
can drop below 32°F (0°C). Stored goods could
freeze.
• TouchtheSuperFrost icon at the desired value.
• Exitsetupmodebytouchingthefreezercompartment
On/Off icon.