Design Guide 2009 Freestanding / Semi Built In Models 24" and 48"
Welcome Liebherr's engineering excellence in Germany provides the largest selection of freezers, refrigerators and wine refrigerators worldwide. Liebherr appliances consistently specializes in the manufacturing of high quality freezers and refrigerators. With more than 300 basic models, we have the widest selection in the world. Liebherr appliances feature premium quality, numerous innovative product ideas and advanced design.
Introduction LIEBHERR WARRANTY PLAN FULL TWO YEAR WARRANTY - For two years from the date of original purchase, your Liebherr Warranty covers all parts and labor to repair or replace any part of the product which proves to be defective in materials or workmanship. FULL FIVE YEAR WARRANTY - For five years from the date of original purchase, your Liebherr Warranty covers all parts and labor to repair or replace any components that prove to be defective in materials or workmanship in the sealed system.
Contents General Remarks Safety Warnings I Electrical Requirements & Safety II IceMaker (if equipped) III Area Requirements IV Safety Regulations V Freestanding/Semi Built In Models 24" and 48" Models: CS13.., SBS26S1 1 Unit Dimensions 2 Cabinet Opening Dimensions 3 Ventilation Requirements 4 Top Door Hinge Clearance CS 13..
General Remarks I. Safety Warnings PLEASE READ AND FOLLOW THESE INSTRUCTIONS This design guide contains Warning and Caution statements. This information is important for safe and efficient installation. This design guide is not replacing the use and care manual which contains important information on how to use Liebherr appliances. Always read and follow all Warning and Caution statements! States a hazard that may cause serious injury or death if precautions are not followed.
General Remarks II. Electrical Requirements & Safety III. IceMaker (if equipped) A 115 Volt, 60 Hz, 15 Amp (20 Amp for side-by-side installation) fused electrical supply is required. Connect undercounter wine cabinet to a 115 VAC, 10 amp (15 Amp for side-by-side installations) circuit that is controlled by a circuit breaker or fuse. We recommend using a dedicated circuit for these appliances to prevent electrical overload.
General Remarks IV. Area Requirements V. Safety Regulations Verify the following: • Floors can support refrigerator’s weight plus approximately 1200 pounds (544 kg) of food weight. Not all Liebherr products are designed for 1200 pounds (544 kg) of food. Some units are smaller and total weights may vary. The appliance complies with UL250 and CAN/CSA-C 22,2 No. 63 and is designed to cool, freeze, store food as well as make ice (if equipped). It is designed as a household appliance.
Freestanding/Semi Built In Models CS 1311, 1360 - SBS 26S1 24" and 48" Models: CS13.., SBS26S1 The unique design of Liebherr's freestanding models feature fully stainless steel doors, and even stainless steel side walls - a perfect combination of design and functionality. New Swing Line doors with bevelled edges are a particularly elegant feature of this combination. Practical lever handles with integrated opening mechanisms make opening the appliance almost effortless.
Freestanding/Semi Built In Models CS 1311, 1360 - SBS 26S1 Unit Dimensions CS 1311 & CS 1360 A. B. C. D. E. F. G. 2-7/32" (56.5 mm) 79-6/32" (2011 mm) 23-20/32" (600 mm) 25-6/32" (640 mm) 24-6/32" (614 mm) 24-26/32" (630 mm) 46-15/32" (1180 mm) SBS 26S1 (CS 1311 & CS 1360) A. B. C. D. E. F. G. 2-7/32" (56.
Freestanding/Semi Built In Models CS 1311, 1360 - SBS 26S1 Cabinet Opening Dimensions The appliance can be integrated into the kitchen units. To adapt the appliance to the height of the row of kitchen units, a suitable top cupboard can be fitted above the appliance. Unit Venting DO NOT restrict the air flow. An air flow of at least 2" (50mm) must be provided. The opening can either be directly over the appliance or on the back of the cabinet on top of the unit (see ventilation requirements).
Freestanding/Semi Built In Models CS 1311, 1360 - SBS 26S1 Ventilation Requirements This type of cabinet must be carefully constructed using the correct dimensions and it must provide suitable ventilation to ensure proper appliance operation. Kitchen Cabinet Airflow 1. The following ventilation dimensions must be observed: There must be a ventilation space at least 31 in.² (200 cm²) at the airflow inlet (1) and at the airflow outlet (2).
Freestanding/Semi Built In Models Top Door Hinge Clearance CS 13.. - SBS 26S1 When installing CS units into a row of cabinets or wall units; use these dimensions to achieve a custom look with the cabinetry while providing the necessary clearance for the top door hinge.
6
Design Guide 2009
