User Manual

Start with no battery
Enables/Disables UPS start-up when batteries are fully depleted.
Remote control
Enables/Disables remote control of the UPS.
Any mode shutdown auto restart enable
Enables/Disables any-mode shut-down auto-restart function.
Output contact NO/NC
Selects the state of the dry-contact output, normally-open or normally-closed.
Input contact NO/NC
Selects the state of the dry-contact input, normally-open or normally-closed.
Dry contact 5 (Output)
Selects the output of dry-contact 5. Options are:
• Low battery
• On bypass
• On battery
• UPS fault
Dry contact 6 (Output)
Selects the output of dry-contact 6. Options are:
• Low battery
• On bypass
• On battery
• UPS fault
Dry contact 1 (Input)
Selects the input of dry-contact 1. Options are:
• Disable
• Battery mode shutdown
• Any mode shutdown
Dry contact 2 (Input)
Selects the input of dry-contact 2. Options are:
• Disable
• Battery mode shutdown
• Any mode shutdown
Sleep mode
Enables/Disables sleep mode.
4 Operation and Display Panel
39