Operation Manual

FGT 433 A2
English - 55
8.5 Timer function
If you are not happy with the level of cooking achieved, you can
use the timer function to continue cooking the food for a little longer.
You do not have to leave the temperature sensor (14) in the meat
for this. The procedure is as follows:
 Briefly press the “MODE" button (4) to access the timer
function.
 Select the time you want by pressing the “MIN / + (6) and
“SEC / -” (5) buttons. You can also hold the buttons down to
make the numbers move faster.
 Press the “TASTE / START” button (3) to start the countdown.
The time on the LCD display (2) now counts backwards and
you can see the time remaining at any time.
 You can use the “MEAT / STOP” button (7) to pause the
countdown, for example to check or turn the food. You can
then resume the countdown by pressing the “TASTE / START“
button (3).
 When the time is up, the LCD display (2) begins to flash red
and a beep sounds with each flash.
 Press the “MEAT / STOP” button (7) to stop the beeping.
Otherwise, the beeping stops automatically after about 2
minutes.