Operation Manual

FGT 433 A2
48 - English
In this case, make sure the connector (15) is inserted
correctly into the socket (16) and that the distance
between the transmitter (13) and the receiver (1) is not
too great. If necessary, switch the transmitter (13) and
receiver (1) off for about 3 seconds and then switch
them back on again. This should resolve the problem.
8.1 Position when in use
The range of the transmitter (13) is about
15 metres. Make sure the distance between the
transmitter (13) and the receiver (1) is not too great. This
would mean accurate temperature measurement would
not be possible.
8.1.1 Receiver (1)
 You can place the receiver (1) in the transmitter (13).
 You can use the belt clip (9) to affix the receiver (1) to your belt
or bag, for example.
 The belt clip (9) has two built-in magnets. This means you can
also stick the receiver (1) to a magnetic surface.