Operation Manual

FGT 433 A2
46 - English
 Unlock the battery compartment cover (20) and remove it.
 Insert two AAA 1.5V (Micro/R03/LR3) batteries, making sure
the polarity is correct. Refer to the diagram inside the battery
compartment (19).
 Close the battery compartment (19) by replacing the cover
(20). You should hear it click into place.
Receiver (1):
 Switch the receiver (1) off using the ON/OFF switch (12).
 Remove the belt clip (9) from the back by pushing it to the left.
 Now remove the battery compartment cover (8) by pushing
gently down in the direction of the arrow.
 Insert two AAA 1.5V (Micro/R03/LR3) batteries, making sure
the polarity is correct. Refer to the diagram inside the battery
compartment (10).
 Close the battery compartment (10) by replacing the cover (8)
and pushing it upwards in the opposite direction to the arrow.
 Now fit the belt clip (9) by placing it on the open side of the
guide and pushing it to the right until it clicks into place.
7.2 Connecting the temperature sensor (14)
Before using it for the first time, remove the transport protection
(black rubber cover) from the temperature sensor (14) end.