User's Manual

36 US-EN
If you want your weather station to announce the absolute air pressure:
Press and hold the HISTORY ABS / REL button for 3 seconds. Then press the
+ or – button to change to the absolute air pressure. Confirm by pressing the
HISTORY ABS / REL button.
Setting the channel
The weather station automatically receives the outdoor sensor signal once you have
completed all the settings.
Note: In the event of interference from nearby equipment transmitting radio signals,
b
oth the humidity (outdoor)
22
and outdoor temperature
25
symbols will flash. Plea se
select a different channel for the outdoor sensor by pressing the CH button
37
on
the weather station or the channel selector switch
44
on the outdoor sensor. The
relevant data is shown in the LC display.
- 1: Outdoor sensor channel 1
- 2: Outdoor sensor channel 2
- 3: Outdoor sensor channel 3
-
: automatic channel change
282650_aur_Funk-Wetterstation_Content_US.indd 36 14.02.17 14:19