User's Manual

23 US-EN
manually. If reception of the WWVB signal is successful, the manual settings are
overwritten.
Setting the 12 / 24 Hour Mode / °C / °F / hPa / inHg /
Time zone / time / date / language manually
The reception of WWVB radio signal where the weather station has been positioned
may deteriorate or be interrupted. If this happens you can set the device manually.
Follow these steps:
1. Press and hold down the MODE button
34
for about 3 seconds. The display
will flash “12 Hr” or “24 Hr”. Press the + or – button
35
,
36
to choose the de-
sired hour format.
Note: In 12 hour mode, the AM symbol indicates morning
7
. In 12 hour mo de
the PM symbol in the time display stands for afternoon.
2. Confirm your setting by pressing the MODE button. The temperature unit “°C “
or “°F” flashes in the display. Press the + or – button to choose the desired
temperature unit.
3. Confirm your setting by pressing the MODE button. The barometric pressure
unit flashes in the display. Press the + or – button to set the desired unit (hPa /
inHg).
4. Confirm your setting by pressing the MODE button. The time zone indicator
flashes in the display. Press the + or – button to set the desired value (-8 to -5).
282650_aur_Funk-Wetterstation_Content_US.indd 23 14.02.17 14:19