User's Manual

Table Of Contents
7
By installing these mounts, the camera can fix to helmets,bikes,cars and your wrist.
Please refer to below steps to install the mounts.
Fix the camera to a helmet
1. Fix connector
to mount A.
2. Unscrew the cap of connector
, then push the orbicular end of connector
into
connector
. Tighten up the cap of connector
.
3. Connect the camera to the screw end of connector
.
4. After fix the camera to the mounts is complete, please adjust the length of strap
according to helmet’s size. Then tie up the strap to your helmet
+
+
+