Operating Instructions
SSBS 3.0 A2
US-EN
│
9
■
♦ Press and hold the button9 for approximately 3 seconds
to turn on the remote trigger8. The power LED0 lights
up red once and then flashes blue in 1 second intervals.
The remote trigger8 is now in pairing mode for approx.
1 minute. If you do not pair the devices within 1 minute,
the remote trigger8 automatically turns off.
♦ Enable the Bluetooth
®
function on your smartphone and
search for Bluetooth
®
devices. For a detailed description,
refer to the operating instructions of your smartphone.
♦ Select
SSBS 3.0 A2
from the list of devices found on your
smartphone to pair the two devices. When pairing is
complete, the power LED0 turns off.
♦ To turn off the remote trigger8, press and hold the
button9 for approx. 3 seconds. The power LED0 flashes
red briefly 3 times and then turns off completely.
The next time you turn it on, the remote trigger
8
automatically
connects to the most recently connected smartphone. If your
smartphone does not automatically reconnect to the remote
trigger
8
, you will have to connect the devices manually. For a
detailed description, refer to the operating instructions of your
smartphone.
If you want to pair another smartphone with the remote trig-
ger
8
, press and hold the buttone for approx. 2 seconds.
The power LED briefly flashes blue twice and then flashes blue
in one second intervals. The remote trigger
8
is now in pairing
mode for about 1 minute and can be connected to another
smartphone.
SSBS3.0A
21.10.2020 12:05:52