Operating Instructions
Swi-384818_2107
US-EN
│
11
■
Troubleshooting
The remote trigger8 does not turn on.
► The inserted battery is dead. Replace the battery (see chap-
ter on Inserting/replacing battery).
Unable to connect via Bluetooth
®
.
► The Bluetooth
®
function is disabled on the smartphone.
Enable the Bluetooth
®
function on your smartphone. For
more information, refer to the operating instructions of your
phone.
► The remote trigger8 is too far away from the smartphone.
Make sure that the remote trigger8 is no farther than
32 feet from the smartphone.
► Your smartphone may use an unsupported operating system.
Check the operating system version on your smartphone
(for supported operating systems, refer to the chapter on
Technical specifications).
No picture is taken when the
buttonq is pressed.
► Each manufacturer assigns the keys in their camera app
themselves. As a result, a variety of malfunctions can occur
when pressing the
buttonq. For example, the camera
may zoom in instead of taking a picture. If this is the case,
check the operating system settings to see whether there
is an option to use the volume control (+) as an additional
trigger button.
The power LED0 flashes red in one second intervals.
► The battery in the remote trigger8 is dead and must be
replaced (see chapter on Inserting/replacing battery).
Swi-384818_2107
21.10.2020 12:05:52