User's Manual
SKBL 56 A1
US-EN │ 9 ■
Operating the speakers in stereo mode
You can also operate both speakers at the same time from the same Bluetooth
®
device. In this case, each speaker will play back one audio channel.
♦ Make sure that the speakers are turned off and the Bluetooth
®
device is
turned on.
♦ Set the Bluetooth
®
device so that it scans for other Bluetooth
®
devices.
A detailed description of how to do this can be found in the operating
instructions for your Bluetooth
®
device.
♦ Press and hold the
button for about 2 seconds to turn a speaker
on and activate the Bluetooth
®
function. You will hear a beep and the
operating/charging LED
will flash orange und blue. If the speaker con-
nects automatically to an already paired Bluetooth
®
playback device,
then terminate this connection. To do this, hold down the
button
and the
button ( )of the affected speaker for about 2 seconds
until you hear a beep.
♦ Repeat the process with the second speaker. Wait a moment. If the speakers
do not automatically pair with each other, place one of the speakers manu-
ally into pairing mode. To do this, hold down the
button and the
button ( ) of the affected speaker for about 2 seconds until
you hear a higher-pitched beep. Wait a moment. As soon as the two speak-
ers automatically pair with each other, the operating/charging LEDs
of
both speakers will light up blue. You will hear a beep.
♦ Select SKBL 56 A1 from the list of found devices on your Bluetooth
®
device to pair it to a speaker. You will hear a short beep when the connec-
tion has been established successfully. The operating/charging LED
on
the connected speaker will also permanently light up orange. This speaker
will output the left stereo channel.
IB_282774_Bluetooth_SKBL56A1_LB9.indb 9 16.01.17 11:27