User's Manual

SKBL 56 A1

■ 8 │ US-EN

♦ Press and hold the

button for about 2 seconds to turn a speaker

on and activate the Bluetooth

function. You will hear a beep and the

operating/charging LED

will ﬂash orange und blue.

Make sure that the speakers are no more than 32 ft from the Bluetooth

device and each other. Make sure that there are no barriers or electronic

devices placed between them.

♦ Select SKBL 56 A1 from the list of found devices on your Bluetooth

device to pair the two devices. You will hear a short beep when the connec-

tion has been established successfully. The operating/charging LED

will

ﬂash twice in 3 second intervals.

♦ If you want to operate the second speaker in mono mode with a diﬀerent

Bluetooth

playback device, carry out the process described above with

the second speaker. Make sure you do not turn on the second speaker until

you have paired the ﬁrst speaker with a Bluetooth

playback device.

You can now use the speaker wirelessly to listen to your favourite tunes.

The next time you turn on the speakers, they will connect automatically to the

most recently connected Bluetooth

device. If your Bluetooth

device

does not automatically reconnect, you will have to re-establish the connection

manually. A detailed description of how to do this can be found in the oper-

ating instructions for your Bluetooth

device.

If you want to connect the speaker to another Bluetooth

device, you must

ﬁrst unpair the current Bluetooth

device. To do this, hold down the

button and the button (

)

of the aﬀected speaker for about

2 seconds until you hear a beep. Alternatively, you can terminate the connec-

tion on your Bluetooth

device. In this case, you will also hear a beep.

IB_282774_Bluetooth_SKBL56A1_LB9.indb 8 16.01.17 11:27